Technology
Capped co-extrusion, engineered layer by layer.
Neoline profiles are not painted or laminated. The protective cap is extruded simultaneously with the core, fusing into a single body that cannot delaminate, peel or require refinishing.
Polymer cap
A co-extruded outer shell bonded to the core on all four sides. It carries the colour and grain, and blocks moisture, UV and staining.
Composite core
Recycled wood flour and reclaimed polymer, compounded and extruded under pressure for dimensional stability across temperature swings.
Structural geometry
Ribbed and hollow profiles tune stiffness against weight, so spans stay rigid while boards remain manageable on site.
Fastening system
Hidden clips and interlocking edges remove face-screws, allowing controlled expansion and a continuous, uninterrupted surface.
Testing
Verified before it is specified.
Freeze–thaw cycling
Dimensional change measured across repeated cycles.
Accelerated UV
Colour hold verified against extended xenon-arc exposure.
Slip resistance
Wet and dry traction tested on embossed deck surfaces.
Flexural load
Span tables derived from tested deflection limits.
Moisture uptake
Capped surfaces measured for water absorption over time.
Scratch & stain
Surface tested against common household and site agents.